Run flags, LED whips, antennas, or a small center light from the spare tire carrier without drilling. Built on our patented flag system, these mounting plates deliver OEM‑grade fitment, proven durability, and a clean look for modern 4x4s. All products include a 1‑year warranty.
A carrier‑mounted bracket places your flag or whip high and centered for visibility on dunes and trails. It improves stability over fender or bumper locations and, with the right plate, can preserve the rear camera and third brake light. Wire routing is straightforward, and quick‑release interfaces let you swap between a whip, flagpole, or antenna in seconds. Anti‑loosening hardware helps control vibration.
Vehicle‑specific plates bolt to the spare tire studs for a direct install. Compatible options keep camera and third brake light function. Choose center or offset placement with clearance for larger spares and room for a quick‑release adapter, LED whip, or compact center light.
Universal plates cover common 5‑ and 6‑lug patterns. Adjustable slots, shims, and standoffs help align around aftermarket carriers, wider wheels, and beadlocks while maintaining tailgate clearance. See product notes for pattern, offset, and camera clearance by model.
Plates use CNC‑formed steel or 6061‑T6 aluminum, with gussets where needed. A fine‑textured black powder coat resists UV, salt, and trail debris. Tight tolerances support repeatable installs and secure accessory fit.
Double‑shear attachment points, anti‑rotation features, and quality fasteners (nylocs and lock washers) minimize flutter and fatigue. Each plate is validated for common off‑road flagpoles and LED whips, with recommended heights and accessory weight guidelines listed per SKU.
The bracket locates on factory studs or carrier hardware—no drilling or body cuts. It installs with hand tools, maintains spare serviceability, and works with many aftermarket carriers. Clear torque specs and step‑by‑step guides support a confident install.
Swap between a flag, LED whip, or antenna using modular quick‑release adapters. Choose a whip‑and‑light plate if you need a centered pod; pass‑throughs and cable‑friendly edges support clean, protected wire runs.
Re‑check torque after early rides, especially with tall whips or rough routes. Keep the powder‑coated plate clean with mild soap, apply anti‑seize on dissimilar metal joints where recommended, and inspect wiring and grommets after dusty or wet trips.
Select a streamlined plate for flag/whip‑only builds, or a combo design to add a centered pod or small bar for reverse or chase lighting.
Center plates maximize symmetry and camera alignment. Offset designs help clear oversized spares or restore camera sightlines, with adjustments to avoid rear wiper or plate interference.
A fine‑textured black powder coat is standard. Custom colors are available with minimum order quantities, and free laser logo marking is offered on in‑stock plates.
Vehicle‑specific designs maximize fitment and clearance. Universal plates deliver broad coverage and value for mixed fleets while staying within the quick‑release ecosystem.
Snap‑in/snap‑out adapters simplify switching between flag, whip, and antenna, or removing hardware for storage and security.
Choose flagpoles or plug‑and‑play LED whips in common diameters and lengths. The interface accepts popular bases and provides cable‑friendly paths.
Select an antenna‑ready plate for GMRS or ham setups, with grommeted pass‑throughs and tie points for clean coax routing.
Run a high, centered flag or whip so groups can spot you over crests and in forests—without drilling panels.
Pair a whip‑and‑light plate with a chase light for dust and night visibility, while a dune whip signals your position to other drivers.
Compact designs keep the tailgate functional and camera clear. Quick‑release hardware lets you remove the whip for parking garages or car washes.
Q: Will this block my rear camera or third brake light?
A: Vehicle‑specific plates aim to preserve camera and brake light. Universal options include offsets to work around them; check notes for your model.
Q: Do I need to drill my tailgate?
A: No. These brackets use existing spare carrier hardware for a bolt‑on install.
Q: What whip sizes are supported?
A: Plates are designed around common off‑road flagpoles and LED whips. See each SKU for recommended length, weight, and any highway‑use guidance.
Q: Can I run both a whip and a center light?
A: Yes. Choose a whip‑and‑light plate to add a center light while keeping a whip or antenna on the same bracket.
Our patented flag system, in‑house R&D, and private molds deliver consistent fitment in a non‑destructive package. Products are field‑tested and typically ship within 2 days when in stock. We support customization (free laser logo on stock items, custom colors with MOQ 100), offer flexible delivery terms (FOB, EXW, DDP), and accept payments via Alibaba, PayPal, T/T, and wire. All plates carry a 1‑year warranty.
Request a quote, confirm fitment for your vehicle, or ask about custom colors and branding.
No products found